PRE-LAUNCH CHECKLIST
In the pre-launch checklist below, you’ll find information that you can use to help make sure you fully enjoy your day on the water. It’s regular attention to these basic items that will help make boating the safe and enjoyable experience it’s meant to be.
1. Inspect dock and heaving lines
2. Check navigation lights
3. Check anchor and tackle
4. Inspect trailer winch
5. Care for rear wheels of your tow vehicle the same as trailer wheels (see #9)
6. Ensure registration numbers are properly displayed, plus current registration and other necessary 5 documentation is onboard
7. Ensure trailer hitch and safety chains are secure, and inspect trailer wires and connections
8. Check hull for damage, soft spots or blistering
9. Grease bearings, ensure lug nuts are tight and not rusting, check tire tread and pressure
10. Test bilge pump
11. Check gauges
12. Test marine radio
13. Check magnetic compass, charts and navigation tools
14. Check engine oil for level and color
15. Check fuel system for leaks (visual and “sniff test”). Check fuel level for trip (1/3 out, 1/3 return, 1/3 spare)
16. Ensure battery connections are clean and tight
17. Replace anodes if over half gone
18. Check propeller for damage, shaft for debris, prop nut torque
19. Test trim, tilt supports and inspect rams. Ensure proper trailering support is used
20. Ensure scuppers are clear, bilge clean and drain plug installed
21. Check transom for cracks
22. Inspect trailer bunks for damaged boards or torn carpet
23. Ensure trailer lights are sealed and working
In the pre-launch checklist below, you’ll find information that you can use to help make sure you fully enjoy your day on the water. It’s regular attention to these basic items that will help make boating the safe and enjoyable experience it’s meant to be.
1. Inspect dock and heaving lines
2. Check navigation lights
3. Check anchor and tackle
4. Inspect trailer winch
5. Care for rear wheels of your tow vehicle the same as trailer wheels (see #9)
6. Ensure registration numbers are properly displayed, plus current registration and other necessary 5 documentation is onboard
7. Ensure trailer hitch and safety chains are secure, and inspect trailer wires and connections
8. Check hull for damage, soft spots or blistering
9. Grease bearings, ensure lug nuts are tight and not rusting, check tire tread and pressure
10. Test bilge pump
11. Check gauges
12. Test marine radio
13. Check magnetic compass, charts and navigation tools
14. Check engine oil for level and color
15. Check fuel system for leaks (visual and “sniff test”). Check fuel level for trip (1/3 out, 1/3 return, 1/3 spare)
16. Ensure battery connections are clean and tight
17. Replace anodes if over half gone
18. Check propeller for damage, shaft for debris, prop nut torque
19. Test trim, tilt supports and inspect rams. Ensure proper trailering support is used
20. Ensure scuppers are clear, bilge clean and drain plug installed
21. Check transom for cracks
22. Inspect trailer bunks for damaged boards or torn carpet
23. Ensure trailer lights are sealed and working
No comments:
Post a Comment